01 — Cheapest way to add capacity
The best binder pages and refills for Pokemon cards
Loose pocket pages are the cheapest way to store cards and the easiest thing to buy wrong. Two specifications decide it: which way the pocket opens, and how many holes are punched in the spine.
Disclosure — Pull & Binder earns a commission when you buy through our Amazon links, at no extra cost to you. It does not change which products we pick or what we say about them. How this site is funded.
| # | Product | Best for | Score | Price |
|---|---|---|---|---|
| 1 | ![]() Dragon Shield 18-Pocket Pages (Standard Size) Best side-loading refill page | Best side-loading refill page | 8.2 | Check price on Amazon #ad — we earn a commission on qualifying purchases. Price and stock are shown on Amazon. |
| 2 | ![]() Ultra Pro Premium Series 9-Pocket Side Load Pages (100ct) Best side-loading page for a 3-ring binder | Best side-loading page for a 3-ring binder | 8.2 | Check price on Amazon #ad — we earn a commission on qualifying purchases. Price and stock are shown on Amazon. |
| 3 | ![]() BCW LaserWeld 9-Pocket Page (100ct) Best cheap refill page | Best cheap refill page | 7.4 | Check price on Amazon #ad — we earn a commission on qualifying purchases. Price and stock are shown on Amazon. |
| 4 | ![]() Ultra Pro 4-Pocket Secure Pages for Toploaders (100ct) Best page for cards already in toploaders | Best page for cards already in toploaders | 7.9 | Check price on Amazon #ad — we earn a commission on qualifying purchases. Price and stock are shown on Amazon. |
| 5 | ![]() Ultra Pro Platinum 9-Pocket Pages Best for a binder you already own | Best for a binder you already own | 6.9 | Check price on Amazon #ad — we earn a commission on qualifying purchases. Price and stock are shown on Amazon. |
Tap any row to jump to the full write-up. Scores are our own, against the rubric below.
02
What loose pages are for
Almost every binder this site recommends has its pages welded in: you buy a book, you get twenty sheets, and that is the binder. Loose pocket pages are the other model. You buy a ring binder — or already own one — and you buy pages by the pack, which means two things a welded binder cannot do.
The first is cost. A hundred-page box of 9-pocket pages stores 1,800 cards, which is more than five premium binders' worth, for less than one of them. If the job is getting several thousand cards off a desk and into something safe, nothing else is close. The second is reordering. A welded binder lets you move cards between pockets; a ring binder lets you pull out a whole page and put it somewhere else. When a new expansion lands and a set needs ten more pages in the middle, that is the difference between five minutes and an evening.
What you give up is the cover. A ring binder is a ring binder: no padding, no stiffened shell, no zip, and rings that press on the spine edge of every card nearest them. For cards that matter, a proper zippered binder is the better home, and binder or toploader? deals with the choice one level up.
03
Specification one: which way the pocket opens
This is the most important thing on the page and the thing cheap pages get wrong. A top-loading pocket opens upward. Tip the binder, carry it the wrong way up, or let a child pick it up by one cover, and the cards slide out. A side-loading pocket opens toward the spine, where the closed binder blocks it, so nothing comes out no matter how the book is held.
Welded binders solved this years ago — every binder this site recommends side-loads. Loose pages mostly did not, because top-loading pages are simpler and cheaper to make, and for decades loose pages were a sports-card product that lived on a shelf. If you are buying loose pages for a collection that moves, pay the small premium for side-loading. It is the single best protection-per-dollar decision available in this category. Side-loading vs top-loading binder pages has the full comparison.
Three of the five picks below side-load. We kept the top-loading options because they are genuinely the cheapest way to store bulk, and bulk commons sitting on a shelf do not need the protection. Just be clear about which job you are buying for.
04
Specification two: the hole-count trap
This is the one that produces returns. Loose pages come punched in two patterns, and they are not compatible.
- 11 holes on the spine. The pattern used by card-specific ring albums — the D-ring collector albums sold by Ultra Pro, BCW and Dragon Shield. Dragon Shield's pocket pages and Ultra Pro's Silver and Platinum Series top-loading pages are punched this way.
- 3 holes. The standard office pattern, so these fit the inexpensive ring binder from any stationery aisle. Ultra Pro's Premium Series side-loading pages and its 4-pocket toploader pages are punched this way.
There is an annoying consequence hiding in that split: on the pages we checked, the side-loading options were mostly 3-hole and the 11-hole options were mostly top-loading. So if you own a card-specific 11-ring album, your side-loading choices are narrower, and Dragon Shield's 11-hole side-loading pages are close to the only answer. If you are starting from scratch, buying a cheap 3-ring binder and 3-hole side-loading pages is the cheaper and better-protected route.
Measure before you order either way. Count the rings on the binder you intend to fill, and if it is already full of pages, pull one out and count the holes.
05
How we picked these
- A stated material. Acid-free at minimum, and we note which listings also say PVC-free and which only say archival-safe. Cheap unbranded pages often say nothing at all, and a PVC page in long-term contact with a card surface is the one storage mistake that is genuinely hard to undo.
- A published pack size and page dimension. Every pick states pages per pack and pocket dimensions, so cost per card stored is calculable rather than guessed.
- Both pocket directions and both hole patterns represented. A roundup that only ranked the best page would be useless to someone whose binder takes the other pattern.
- One page for toploaders. A large share of the people searching for refill pages have cards already in 35pt holders, and a standard 9-pocket page will not take one. That reader needs a different product, so one is included.
- Current manufacturer listings. Specifications and pack sizes were read off the Ultra Pro, Dragon Shield, BCW and distributor listings cited at the bottom of this page on 9 November 2026.
06
How we scored these
This page uses the same five metrics as every binder page on this site, applied to loose pages. That makes the scores comparable with the binder roundups, which is deliberate — a loose page should be judged against the binder it is competing with. Note that protection and kid-proofing are capped for any loose page no matter how good it is, because there is no cover in the product: the binder supplies that, and you are choosing the binder. We do not own all five and claim no testing; the scores apply our published rubric to stated specifications. Our methodology explains how.
How we score. The same five metrics this site uses on every binder page, applied to loose pages. Protection is almost entirely about which way the pocket opens; kid-proofing is about what happens when the binder gets tipped; capacity is cards per pack; page quality is the stated material and seam construction; value is cost per card stored. Our scores against our rubric, published so you can weigh it differently.

Dragon Shield 18-Pocket Pages (Standard Size)
Dragon Shield
Side-loading refill pages in packs of fifty - nine pockets a side, nine hundred cards a pack. The only loose page we found that both side-loads and states archival-safe, acid-free and PVC-free materials.
Typical price: upper-tier per page. We do not print a number — check the current price on Amazon before you buy.
#ad — we earn a commission on qualifying purchases. Price and stock are shown on Amazon.
Specs
- 50 pages per pack (900 cards at 18 pockets a page)
- Side-loading pockets
- 11 holes punched on the spine
- Fits cards up to 63 x 88mm
- Archival safe, free of PVC and acid
- Non-glare version sold as a separate item
What is good
- Side-loading, which no cheap loose page is - cards do not fall out when the binder is tipped
- Materials are stated plainly: archival safe, no PVC, no acid
- Black backing stops the card behind showing through the card in front
- A non-glare option exists for binders that get photographed
- Drops straight into Dragon Shield's own Zipster and Slipcase binders
What is not
- The most expensive loose page per sheet in this group
- 11-hole punching does not fit every 3-ring office binder - check your rings first
- Sold in 50-page packs, so the minimum spend is higher than a 25-page pack
- Individual colors and glare types go out of stock on the manufacturer's store
Scored against our rubric
- Protection
- 8.0
- Kid Proof
- 6.0
- Capacity
- 9.0
- Page Quality
- 9.5
- Value
- 7.5

BCW LaserWeld 9-Pocket Page (100ct)
BCW
The lowest cost per card stored of anything on this page. Laser-welded seams rather than stitched or glued ones, acid-free archival-safe polypropylene, and a hundred pages in a box - as long as you accept top-loading pockets.
Typical price: entry-level per page. We do not print a number — check the current price on Amazon before you buy.
#ad — we earn a commission on qualifying purchases. Price and stock are shown on Amazon.
Specs
- 100 pages per box (1,800 cards)
- Top-loading pockets
- Laser-welded seams, engineered to lay flat
- 8 7/8 x 11 1/4 inch pages, 2 5/8 x 3 5/8 inch pockets
- Acid-free, archival-safe polypropylene
- Fits standard 3-ring binders
What is good
- Cheapest per page of the loose pages we checked, and cheaper again by the case
- Seams are the failure point on a cheap page, and a laser weld is the better version
- Acid-free and archival-safe polypropylene stated on the listing
- A side-loading version of the same page exists if you want to pay a little more
What is not
- Top-loading - tip the binder and cards come out, which is the whole argument against loose pages
- BCW's listing says acid-free and archival-safe but does not use the words PVC-free
- No cover protection; the binder is your problem
- Pocket dimensions are snug on a double-sleeved card
Scored against our rubric
- Protection
- 5.5
- Kid Proof
- 4.0
- Capacity
- 10.0
- Page Quality
- 8.5
- Value
- 10.0

Ultra Pro 4-Pocket Secure Pages for Toploaders (100ct)
Ultra Pro
Loose pages cut for a loaded toploader rather than a bare card, with a flap over every pocket. The cheap way to get a toploadered collection into a binder without buying a dedicated toploader binder.
Typical price: upper-tier per page. We do not print a number — check the current price on Amazon before you buy.
#ad — we earn a commission on qualifying purchases. Price and stock are shown on Amazon.
Specs
- 100 pages (400 toploaders)
- 4 pockets per page, each taking a toploader up to 130pt
- A protective flap over every pocket
- Pre-punched 3 holes for a standard 3-ring album
- Acid-free, non-PVC, made in the USA
What is good
- Takes a loaded toploader, which no standard 9-pocket page will
- The per-pocket flap keeps dust out and the holder in - the closest a loose page gets to side-loading
- Rated to 130pt, so thick cards fit, not only 35pt holders
- Far cheaper than a dedicated toploader binder for a small collection
What is not
- Four pockets a page means a thick binder fast - 100 pages is a lot of plastic
- Most expensive page per card stored on this list
- Retailers list it under both Premium Series and Platinum Series names, which makes it easy to buy the wrong page
- A bare sleeved card rattles in a toploader-sized pocket
Scored against our rubric
- Protection
- 8.5
- Kid Proof
- 7.0
- Capacity
- 6.0
- Page Quality
- 9.0
- Value
- 7.0

Ultra Pro Platinum 9-Pocket Pages
Ultra Pro
Loose pages for a three-ring binder you already have. The cheapest way to add capacity, and the only option if you want to reorder whole sheets rather than individual cards.
Typical price: entry-level per card stored. We do not print a number — check the current price on Amazon before you buy.
#ad — we earn a commission on qualifying purchases. Price and stock are shown on Amazon.
Specs
- 100 pages (1,800 cards)
- Top-loading pockets
- Acid-free, PVC-free
- Fits any standard 3-ring binder
What is good
- By far the lowest cost per card stored
- Whole sheets can be reordered, which fixed-page binders cannot do
- Works with a $4 office-supply ring binder
What is not
- Top-loading — cards slide out if the binder is inverted
- A ring binder creases cards at the spine over time
- No cover protection at all
Scored against our rubric
- Protection
- 5.0
- Kid Proof
- 4.0
- Capacity
- 10.0
- Page Quality
- 8.0
- Value
- 9.5
Prices and stock are shown on Amazon, not here. Our price data was last refreshed October 6, 2026.
07
What each one actually costs you per card
Cost per card stored is the number that decides a bulk purchase, and it varies more than people expect across these five. The arithmetic is simple: pockets per page, times pages per pack. A 9-pocket page in a 100-page box holds 1,800 cards. A 4-pocket toploader page in a 100-page box holds 400 holders — four and a half times fewer slots from the same size box, at a higher price.
| Page | Pack | Cards per pack | Loads | Holes |
|---|---|---|---|---|
| Dragon Shield 18-Pocket | 50 pages | 900 | Side | 11 |
| Ultra Pro Premium 9-Pocket Side Load | 100 pages | 900 | Side | 3 |
| BCW LaserWeld 9-Pocket | 100 pages | 1,800 | Top | 3-ring fit |
| Ultra Pro Platinum 9-Pocket | 100 pages | 1,800 | Top | 11 |
| Ultra Pro 4-Pocket Secure (toploaders) | 100 pages | 400 holders | Flap | 3 |
Read that table with the job in mind rather than the price. For a few thousand commons going onto a shelf, the top-loading 100-page boxes are the right answer and the cheapest by a wide margin. For the two hundred cards a child actually looks at, the side-loading pages cost a few dollars more over the whole collection and remove the only real failure mode. For cards in holders, there is exactly one product that fits and it is not cheap.
08
Refilling a binder you already own
If you are here because a binder is full rather than because you want to build one from pages, the honest answer depends on what kind of binder it is. A welded binder — any zippered portfolio with sheets stitched into the spine — cannot be refilled. There is no mechanism. You buy a second binder, and the best Pokemon card binders ranks them.
A ring binder can be refilled indefinitely, and that is its advantage. Dragon Shield's Zipster line is the interesting middle case: it is a zippered, reinforced binder that happens to use D-lock rings, so it takes loose pages and can be expanded or reordered like a ring binder while protecting cards like a real binder. The best 12-pocket binders covers it, and the Dragon Shield range has the rest of the family.
One more thing worth knowing before you fill a hundred pages: pages do not fix sorting. Deciding what goes in the binder, what goes in a deck and what is bulk is the step that determines how many pages you need, and doing it afterwards means buying the wrong ones. How to organize a Pokemon card binder covers the sorting logic, and how to sort Pokemon cards covers the mechanics for a large pile.
09
What to protect the cards with first
A pocket page is not a sleeve. The page protects the card from dust, fingers and light; a sleeve protects the card surface from the page and from being pulled in and out of it. For cards going into a binder long term, a penny sleeve is the cheap floor and a perfect-fit sleeve is the better version — the best sleeves for a binder deals with the fit question, which matters more on a tight 12-pocket page than on a 9-pocket.
And one thing to avoid: do not put a graded card in a binder page. Slabs do not fit, and the ones sold as slab pages are a compromise. Storing graded cards explains what to use instead.
10
Questions people actually ask
Do Pokemon binder pages fit any binder?
Are side-loading pages worth the extra cost?
How many cards does a 100-page box hold?
Can I put toploaders in binder pages?
Are cheap binder pages bad for cards?
Can I add pages to a zippered binder?
11
Read next
12
Sources
- Ultra Pro — store search for pocket pages (Platinum Series 9-pocket in 100 and 25-count, Silver Series 9-pocket in 100 and 25-count, Premium Series 9-Pocket Secure and 9-Pocket Side Load in 100-count, Premium Series 4-Pocket Secure for toploader sleeves in 100-count, Platinum Series 4-pocket mini album pages, and single 4-pocket pages for PSA slabs and ONE-TOUCH displays)
- Asmodee — Ultra Pro Sideloading 9-Pocket Pages, clear, 100-count (ULT82892): side-loading, pre-punched 3 holes for a standard 3-ring binder, acid-free and no PVC, UV protection, high-clarity outer layer, lays flat
- Asmodee — Ultra Pro Toploading 9-Pocket Pages, Silver Series, standard size, clear, 100-count (ULT81442-E): pre-punched 11 holes on the spine, acid-free and no PVC — the 11-hole pattern used by card-specific ring albums rather than office binders
- Asmodee UK — Ultra Pro 4-Pocket Secure Pages for toploaders, 3-hole (UPR15848): each pocket holds a toploader up to 130pt, a protective flap on each pocket secures contents and keeps dust and dirt out, acid-free, non-PVC, made in the USA; sold by retailers under both Premium Series and Platinum Series names
- Dragon Shield — Pocket Pages collection (8, 16, 18 and 24-pocket standard-size pages, each in regular and non-glare versions, plus an 18-pocket Japanese size; nine products listed, all showing a price and all returned by the in-stock filter)
- Asmodee — Dragon Shield 18-Pocket Sideloader Pages, non-glare, 50-count (AT-10311): side-loading, 50 pages per pack, fits cards to 63 x 88mm, 11 holes punched on the spine, archival safe and free of PVC and acid; the non-glare version has a frosted surface to cut reflection)
- BCW Supplies — LaserWeld 9-Pocket Page, 100-count box (1-LWP9T-100): 100 pages per box, top-loading, strong laser-welded seams engineered to lay flat, acid-free archival-safe polypropylene, 8 7/8 x 11 1/4 inch pages with 2 5/8 x 3 5/8 inch pockets, fits standard 3-ring binders; a side-loading version of the same page (1-LWP9S-100) is listed at a small premium
- The Card Shop Finder — best card binders guide (construction, capacities, pocket orientation)